Breathable plastic runway

Breathable Plastic Runway

Type: Breathable
Thickness: 13mm
Foundation: reinforced concrete foundation, cement foundation
Useful life: more than 8 years

Breathable plastic runway is an advanced technology introduced from abroad, after specialization, has now become China's large, medium and elementary school popular athletic field. According to incomplete statistics, breathable plastic runway in its large, medium and elementary school in the proportion of plastic pavement accounted for 63%.
Type: Breathable
Colors: red, green, blue
Thickness: 13mm
Foundation: reinforced concrete foundation, cement foundation
Useful life: more than 8 years

Scope of application

Suitable for official track and field events, general sports competitions, various types of school grounds and other climatic conditions in the -16 degrees above the region, not to be used in cold and snowy areas.

Product Characteristics

1) High durability and anti-slip features
2) High Motion Performance
3) Desorption of high impact
4) Resistant to high and low temperatures
The system utilizes a spraying tool containing a polyurethane compound and fine EPDM granules in place of a rubber crumb and polyurethane adhesive base suitable for spraying.
The system provides an economical solution agency, entertainment and on-site training facilities with great textures.

Construction

1、Use a roller brush to brush the one-component adhesive or primer evenly on the cement foundation.
2、Before the primer is not cured, the one-component glue and black rubber particles will be proportioned according to the specified ratio, fully stirred with a mixer, transported to the paving location, and paved with a paver according to the specified thickness; after curing, it will become an elastic layer.
3, with breathable spray surface adhesive and EPDM adhesive particles, EPDM adhesive powder in accordance with the prescribed ratio ratio, mix well, pour into the special sprayer, according to the clockwise and counterclockwise direction in two to three times for spraying, curing and for non-slip wear-resistant layer, the commonly used colors are red and green.