Badminton court

Badminton court is a length of 13.40 meters, doubles width 6.10 meters, singles width 5.18 meters, doubles court diagonal length = 14.723 meters, singles court diagonal length = 14.366 meters. Nowadays, elementary school, middle schools, universities, organizations, units, hospitals, etc. generally have their own badminton courts, and they are all plastic. Regardless of whether a wooden board floor or a synthetic material floor is used, it must be ensured that the athletes do not feel too slippery or too sticky and have a certain degree of elasticity during the game.

Technical indicators

a. Roll a primer evenly with a roller.
b. Use special pitch polyurethane glue and color EPDM particles to mix evenly at the ratio of 1:5 and then spread the surface layer evenly by hand (according to Party A's requirements for pink treatment), and at the same time, compact it with heated rollers.
c. Allow top coat to cure and scribe lines.

pitch marking

1. The pitch should be a rectangle, 13.4 meters long and 6.1 meters wide, drawn with a line 40 mm wide.
2. The color of the site lines should preferably be white, yellow or other easily identifiable colors.
3. The four 40 mm x 40 mm markers for testing the normal ball speed area shall be drawn on the inside edge of the sideline of the right tee area for both singles, 530 mm and 990 mm from the end line.
4. The widths of these marks are included in the dimensions drawn, i.e., 530 mm to 570 mm and 950 mm to 990 mm from the outer edge of the end line.
5. All site lines are part of the area it defines.
6. If the area is insufficient to draw a doubles court, a singles court may be drawn with the end line also being the back serve line, and the net posts or strips representing the net posts shall be placed on the sidelines.